Laser alignment of belt and chain drives is used to remove the axial and radial loads on bearing units.

Usually to maintain the belt and chain drives in order, it is necessary to verify timely the alignment of the pulleys and to control the tension of the belt or chain. Insufficient alignment of belt and chain drives leads to increased vibration and noise, wear on the belts and pulleys, which in turn leads to bearing wear and failure of technological equipment.

The precise laser alignment of belt and chain drives significantly reduces losses!

Widespread delusion is that not aligned such gears have no major negative impact. In connection with these assumptions, many companies in the industry reported higher losses of electricity.

Some studies have reported a decrease to 10% of losses after precise alignment of belt and gears.

If you have problems with equipment using belt or chain drives, the main reason is the poor alignment and improper tension of the belt or chain.

We offer laser alignment of belt and chain drives, which provides the following advantages:

- Increased productivity of the machine;
- Increased life of belts, pulleys and bearings
- Allows optimum use of the oil film (the lower is the risk of overheating and secondary damage)
- Reduced friction and lower energy consumption
- Less vibration and reduced noise level
- Less risk of serious accidents and a safer working environment
- Greater overall savings with fewer spare parts, lower energy consumption and less unscheduled downtime.